PEL 412i Unigizer Electric Fence Energizer — 12 J vs ProFence P20 2-in-1 Battery / AC Electric Fence Energizer

PEL 412i Unigizer delivers up to 12 J output with 16 J stored energy. Manufacturer-rated coverage: up to 65 km of fence, 180 acres (70 ha). Supports AC Mains Via Included Adapter · 12 V DC Battery · Solar Compatible With 12 V Battery And Charge Controller. Day/night sensing adjusts the pulse rate; output and pulse speed are adjustable. Indicator lights show fence voltage and battery condition. Front terminals accept two wires; mounts on a wall, post or fence wire. Cyclic Wave technology, battery-saving control and earth-system monitoring. Backlit LCD shows output, battery and earth voltage. Fence remote supported (sold separately). Bi-polar operation supports dry soils; includes a half-voltage terminal and low-interference technology. Battery lead and mains adaptor included. Solar operation uses panels charging a connected battery. Indoor or outdoor placement depends on the power supply. Manufacturer product code: 880 0009-263. Three-year manufacturer warranty, subject to applicable terms. Additional specifications No-load voltage: 9,100 V. Voltage at 500 ohms: 7,700 V. Input supply: 12 V DC / 100–240 V AC via mains adaptor. Minimum earth rods: 6; the required number depends on soil conditions and the installation. Use the mains adaptor indoors in a dry location. Outdoor examples use a 12 V battery, with an optional Unigizer solar kit. Suitable for permanent, semi-permanent, temporary and strip-grazing fence systems. The voltage/battery light bar turns red under heavy loading. Coverage is a guide for multi-wire fences and depends on fence condition.

A ProFence P20 dual-purpose electric-fence energizer for portable or fixed farm fencing. It can operate from a 12 V battery or a 110–240 V AC adapter, making it suitable for strip grazing, livestock fencing and remote installations. Specifications - Power options: 12 V DC battery or AC operation through a 12 V adapter - Indicator: LED performance indicator - Terminals: large front-mounted terminals Package contents - 1 × ProFence P20 energizer - 1 × 1 m battery wire with covered crocodile clips - 1 × AC adapter - 1 × 1 m red fence wire - 1 × 1 m black earth wire - 2 × 200 mm earth stakes - Mounting screws and hardware Installation and use - Choose battery or AC adapter operation according to the installation. - Connect the fence and earth wires to the clearly marked front terminals. - Install the earth stakes securely and keep the energizer dry. - Check the LED indicator after connection and test the fence before use. Power Source: AC Mains Via Included Adapter · 12 V DC Battery · Solar Compatible With 12 V Battery And Charge Controller.